Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Little Gables?
Custom window and door orders in Little Gables, FL typically run between $850 and $6,200 per opening, depending on size, glass type, frame material, and impact rating. Most Little Gables homeowners ordering a standard impact-rated custom window with a PGT or CGI frame land somewhere in the $1,100 to $2,800 range per unit, installed. Doors – particularly entry doors and sliding glass units – start closer to $1,800 and can reach $5,500 or more for a wide-panel Therma-Tru system with sidelites.
If you want an exact number for your home, call (727) 291-4678 – a real person picks up around the clock, and we’ll schedule a free on-site estimate with no trip charge inside the home county.
Custom Window and Door Order Cost Breakdown (2026)
The table below reflects what Little Gables homeowners are actually paying in 2026 for custom-ordered, professionally installed windows and doors through Winslow Windows & Doors. These are installed prices – material, labor, permitting coordination, and basic trim work are included. They do not include structural modifications or impact-rated hurricane shutters as a separate line item.
| Product Type | Low End | Mid Range | High End |
|---|---|---|---|
| Custom single-hung impact window (small, up to 24″ x 36″) | $850 | $1,100 | $1,500 |
| Custom double-hung or casement window (mid-size) | $1,100 | $1,600 | $2,400 |
| Custom geometric or specialty-shape window | $1,400 | $2,200 | $3,800 |
| Custom large picture or fixed window (over 60″ wide) | $1,600 | $2,800 | $4,200 |
| Custom impact entry door (single, Therma-Tru or CGI) | $1,800 | $2,600 | $3,800 |
| Custom impact entry door with sidelites or transom | $2,800 | $3,900 | $5,500 |
| Custom sliding glass or patio door (6 ft panel) | $2,200 | $3,400 | $4,800 |
| Custom sliding glass or patio door (12 ft multi-panel) | $3,800 | $5,200 | $6,200 |
| Full-home custom window order (10-15 openings, typical Little Gables ranch) | $14,000 | $22,000 | $34,000 |
What Pushes the Price Up
Three things move a custom order from the low end to the high end faster than anything else: glass package, frame finish, and opening size. In Little Gables specifically, nearly every order we take includes impact-rated laminated glass – it’s required under Miami-Dade County’s High-Velocity Hurricane Zone (HVHZ) code, and that glass alone adds $200 to $600 per unit compared to standard low-E insulated glass. If you’re adding a decorative option – think privacy glass, bronze tint, or a custom grille pattern through a brand like ViewLux or ECO Window Systems – expect another $150 to $400 per opening on top of that.
Frame finish is the other sneaky cost driver. A standard white vinyl frame from ES Windows or CWS is the budget-friendly baseline. Step up to a bronze or dark bronze anodized aluminum frame through CGI or PGT, and you’re adding roughly 20 to 30 percent to the unit cost. Custom color matching – requested fairly often in Little Gables’ older Mediterranean-style homes near the Coral Gables border – can add another $100 to $250 per unit for the specialty powder coat.
What Keeps the Price Down
Ordering multiple units at once is the single most effective way to reduce per-unit cost. On a full-home order of 10 or more windows, the per-opening cost drops meaningfully because we’re making one site visit, one permit pull, and one delivery coordination. Sticking with a standard rectangular shape also helps – geometric and arched windows require custom fabrication lead times and hand-fitting on-site that add both material and labor cost. And if you’re a senior or veteran, our standing 10% discount applies to every order, no expiration date, no fine print.
What Affects Custom Window and Door Pricing in Little Gables
- Miami-Dade HVHZ impact requirements: Little Gables falls under Miami-Dade County’s High-Velocity Hurricane Zone designation. Every window and exterior door we install must meet Miami-Dade Notice of Acceptance (NOA) standards – that means impact-rated laminated glass and reinforced frames as a baseline, not an upgrade. This is non-negotiable here in a way it isn’t in, say, Broward County, and it sets the floor on what custom orders cost.
- Opening size and shape: A straightforward 30″ x 48″ rectangular opening is the cheapest to fill. Once you go larger than 60 inches in any direction, or you need an arched, circular, or eyebrow shape – common in the Spanish Mediterranean architecture you see throughout Little Gables – fabrication complexity and lead time both increase. Some specialty shapes require custom templates pulled from the actual rough opening.
- Brand and product line: We’re authorized installers for eight brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru. PGT’s WinGuard aluminum line and CGI’s 500 Series sit at the premium end. ES Windows and CWS offer excellent HVHZ-rated products at a more moderate price point. Therma-Tru is our go-to for fiberglass entry doors. The brand you choose shapes your cost more than almost any other single variable.
- Lead time and special fabrication: Standard custom windows typically have a 4 to 8 week lead time from a Florida fabricator. If you need a truly non-standard size – say, a 96-inch-wide picture window for a great room overlooking a pool – lead time can stretch to 10 to 14 weeks and the fabrication premium can add $300 to $800 to the unit price. Little Gables is a dense, established neighborhood, so delivery logistics to older lots with limited truck access can occasionally add minor handling costs.
- Frame material and finish: Vinyl frames cost less upfront and resist the salt air that comes off Biscayne Bay better than bare aluminum. Aluminum frames – anodized or powder-coated – last longer and handle large spans better, which is why they’re preferred for wide sliding doors and oversized openings. In Little Gables, where homes often sit close together and lot lines are tight, aluminum’s slimmer sight lines are also a practical aesthetic advantage.
- Permitting and inspection coordination: Miami-Dade County requires permits for window and door replacements that change the size, shape, or impact rating of an opening. Permit costs for a typical Little Gables job run $150 to $450 depending on the scope, and we handle the full permitting process – pulling the permit, scheduling the inspection, and closing it out. That’s folded into our quoted price. Some contractors quote low and then add permit fees after the fact; we don’t do that.
How to Save on Custom Window and Door Orders
Batch Your Order
If your home needs more than three or four windows, order them together. The economics of a custom fabrication run favor larger orders – fabricators reduce per-unit cost when they’re cutting multiple identical or similar frames from the same material sheet. On-site, we’re making one permit pull and one inspection trip instead of several. Little Gables homes built in the 1950s through 1970s often have 10 to 15 openings that haven’t been touched since original construction – replacing them all in one project almost always costs less per window than doing it in phases over three years.
Choose the Right Brand for Your Budget
Not every opening needs the top-of-the-line PGT WinGuard aluminum series. A bedroom window that faces an interior courtyard and doesn’t see direct wind load can be filled with an ES Windows or CWS impact unit that meets Miami-Dade NOA requirements at a lower price point. We’ll tell you honestly where premium brands add value and where a mid-tier option performs just as well for your specific application – because Ed’s name is on the job, and recommending unnecessary upgrades isn’t something we do.
Use the Standing Discounts
Our 10% senior and veteran discount is permanent – it doesn’t expire after a sale event and there’s no form to fill out. If you’re a senior homeowner in Little Gables on a fixed income, that discount on a $20,000 full-home window order saves you $2,000. On any repair or service work over $200, we also take $40 off, automatically. No coupon needed.
Get a Second Opinion Before You Sign
If you’ve already received a written estimate from another contractor, call us. We offer free second opinions on any written estimate – no charge, no obligation. We’ll review the scope, the product spec, and the price line by line and tell you where it looks fair and where it doesn’t. In our experience, Little Gables homeowners who call us for a second opinion find meaningful differences in product quality or scope roughly half the time.
Time Your Order Around Lead Times
Florida’s hurricane season peaks from August through October. If you order custom windows or doors in late spring – April or May – you’re typically ahead of the summer rush at the fabrication level, which can mean shorter lead times and occasionally better availability on popular frame finishes. Ordering in October or November, after storm season, is another low-congestion window that can work in your favor. We can walk you through current lead time estimates when you call – our team stays in close contact with each of our eight authorized brands on scheduling.
Ask About Financing
A full-home custom window replacement in Little Gables is a significant investment – $18,000 to $30,000 for a typical ranch home. We can discuss financing options that spread that cost out without requiring you to delay the project. Call (727) 291-4678 and ask about current financing terms when you schedule your free estimate.
The Little Gables Market: What Makes This Neighborhood Different
Little Gables is a small, tightly knit residential neighborhood tucked between Coral Gables, Miami Springs, and the City of Miami. The housing stock leans heavily toward mid-century CBS (concrete block and stucco) construction, with a fair number of Spanish-tile-roof homes built between the late 1940s and the 1970s. That construction type creates some specific considerations for custom window and door orders that you won’t run into in newer communities.
First, rough openings in CBS homes from this era are rarely perfectly square. Over decades of slight foundation settling – common in Miami-Dade’s limestone substrate – openings can be out of plumb by a quarter inch or more. Custom orders for these homes need to account for that variation at the measurement stage, which is why we always measure twice (sometimes three times) before submitting specs to the fabricator. An off-spec order means a longer wait and additional cost. We’ve done enough jobs in Little Gables and the surrounding Coral Gables area to know where to expect irregularities.
Second, the neighborhood’s proximity to Biscayne Bay and the Miami waterfront means salt air is a real factor in frame material selection. Vinyl frames handle salt exposure well over the long term. Aluminum frames need to be anodized or powder-coated correctly – bare aluminum in a coastal environment corrodes within years, not decades. Every aluminum product we install in Little Gables meets AAMA 2605 finish standards, which is the appropriate spec for this climate zone.
Third, Little Gables sits inside Miami-Dade County’s HVHZ, which has the most stringent hurricane glazing requirements in the country. That’s actually good news for homeowners – it means every properly permitted window or door we install here is built to withstand a Category 5 storm event. It also means your home insurer will likely recognize the upgrade and adjust your windstorm premium accordingly. Several Little Gables homeowners we’ve worked with have seen annual insurance savings that, over five to seven years, offset a significant portion of their window replacement cost.
For a deeper look at the full scope of what we do in this area, visit our Custom Window & Door Order in Little Gables service page, or head to our home page to see the full range of services Winslow Windows & Doors offers across South Florida.
What’s Included in a Winslow Custom Order Quote
When you call us for a free estimate, the number we give you covers the full job – not a base rate with a long list of add-ons tacked on afterward. Here’s what’s in every Winslow custom window or door quote for Little Gables homeowners:
- On-site measurement of each opening (we measure, we don’t ask you to)
- Product specification and brand recommendation based on your budget, opening size, and Miami-Dade NOA requirements
- Miami-Dade County permit application and permit fee coordination (permit cost is itemized separately so you see exactly what the county charges)
- Delivery and on-site staging of units
- Removal and disposal of existing windows or doors
- Installation by background-checked, uniformed technicians
- Flashing, sealant, and interior/exterior trim work to code
- Inspection scheduling and final sign-off coordination
- Done Right Promise: if anything isn’t right, we come back and fix it
Upfront pricing. No surprises on the invoice. That’s not a slogan – it’s how Ed runs every job.
FAQs: Custom Window and Door Order Costs in Little Gables
How much does a custom impact window cost in Little Gables, FL?
A custom impact window in Little Gables costs between $850 and $4,200 installed, depending on size, frame material, and glass package. A mid-size double-hung or casement window in a standard rectangular opening typically runs $1,100 to $2,400. Oversized or geometric units – common in Little Gables’ Spanish-style homes – start around $1,400 and can reach $3,800. Miami-Dade HVHZ requirements mean every window must be impact-rated, which sets the floor higher than in non-HVHZ counties but ensures your home is genuinely protected. Call (727) 291-4678 for a free site estimate – we’ll measure and quote your specific openings at no charge.
How much does a custom entry door cost in Little Gables?
A custom impact-rated entry door in Little Gables runs $1,800 to $3,800 installed for a single-door configuration. Add sidelites or a transom – popular in the larger CBS homes in Little Gables – and the range moves to $2,800 to $5,500. Therma-Tru fiberglass doors sit at the mid-to-upper end of that range and are our most-requested entry door brand for this area because fiberglass handles Florida’s humidity and salt air better than steel over the long term. Call (727) 291-4678 for a quote.
Is it cheaper to repair or replace a custom window in Little Gables?
Repair is almost always cheaper in the short term – a failed seal or a damaged operator can often be fixed for $150 to $450. But if a window frame is corroded, structurally compromised, or no longer meets current Miami-Dade NOA impact requirements, replacement is the right call, and it typically pays for itself over time through lower insurance premiums and reduced air conditioning costs. We’ll give you an honest assessment of whether a repair makes sense or whether the money is better applied to a replacement – and we’ll put that in writing before you decide anything. Call (727) 291-4678 for a free second opinion on any written estimate you’ve already received.
How long does a custom window or door order take in Little Gables?
From signed contract to completed installation, most custom window orders for Little Gables homes take 6 to 10 weeks. That breaks down as roughly 4 to 8 weeks of fabrication lead time at the manufacturer, plus 1 to 2 weeks for permitting and scheduling the installation crew. Complex orders – large-format sliding glass doors, multi-panel systems, or unusual geometric shapes – can run 10 to 14 weeks. We give you a realistic timeline at the estimate stage, not an optimistic one we can’t keep. If your timeline is tight because of a real estate transaction or an insurance deadline, tell us when you call and we’ll see what we can do.
Do permits add to the cost of custom windows and doors in Little Gables?
Yes. Miami-Dade County permit fees for a window and door replacement project in Little Gables typically run $150 to $450 for a standard residential scope. We handle the permit application, all required documentation, and inspection scheduling. The permit cost is itemized in your quote so you can see exactly what the county charges versus what we charge – they’re separate line items. Some contractors bury the permit fee inside a vague “miscellaneous” charge or don’t pull a permit at all, which creates a code violation that surfaces at the worst possible time: when you sell the house or file an insurance claim. We pull permits on every job. No exceptions.
Does Winslow offer financing for custom window and door projects?
Yes. A full-home custom window replacement in Little Gables can run $14,000 to $34,000 depending on the number of openings and product selection, and we understand that’s a significant outlay. We can discuss financing options when you call (727) 291-4678 – our goal is to help you get the right products installed correctly, not to upsell you into something that strains your budget.
Why Little Gables Homeowners Call Winslow First
Ed Winslow started this company in 2011 with a straightforward premise: do the job right, stand behind it completely, and treat every homeowner the way you’d want a contractor to treat your own family. Fourteen years later, that premise hasn’t changed. What has changed is the depth of experience we’ve built in neighborhoods exactly like Little Gables – dense, older, architecturally particular communities where off-the-shelf solutions don’t fit and where homeowners have been burned by contractors who disappeared after the check cleared.
Our Done Right Promise covers every job we do. That’s not a standard one-year workmanship warranty with fine print that carves out most real-world problems. It means that if the installation isn’t right – a leak, a misaligned frame, a seal that fails prematurely – we come back and make it right. Period. Ed’s name is on the business, which means his reputation is attached to every window and every door we touch in Little Gables.
We’re authorized installers for eight premium brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru. That breadth matters in a custom-order context because no single brand makes the right product for every application. A Little Gables homeowner with a 1960s ranch home, a tight budget, and a need for Miami-Dade NOA compliance has different needs than a homeowner on a larger lot doing a full architectural renovation. We match the brand and product to the job, not the other way around.
When you call (727) 291-4678, a live person answers – not a voicemail, not a scheduling bot, not a national call center that forwards messages to a local contractor you’ve never heard of. Someone who knows Little Gables, knows the brands we install, and can start answering your questions right then. At 2 a.m. after a storm, that matters.
Key Takeaways
- Custom window and door orders in Little Gables cost $850 to $6,200 per opening installed, with most homeowners landing between $1,100 and $2,800 for standard impact windows.
- Miami-Dade HVHZ requirements set a higher baseline cost than most Florida counties – but they also mean your windows genuinely protect your home and can reduce your insurance premiums.
- Lead times run 6 to 10 weeks for most orders; geometric and oversized units can take 10 to 14 weeks.
- Ordering multiple units at once significantly reduces per-opening cost.
- Seniors and veterans receive a permanent 10% discount. Repairs over $200 get $40 off. No expiration dates.
- Every Winslow quote covers permits, installation, disposal, and the Done Right Promise – no hidden fees.
- Free estimates and free second opinions on written quotes – call (727) 291-4678 anytime.
Ready for an Exact Quote? Call Winslow Today
If you’re weighing a custom window or door order for your Little Gables home, the fastest way to get a real number is to call us. We’ll schedule a free on-site estimate, measure every opening ourselves, and give you a written quote that covers the full scope – product, labor, permits, and the Done Right Promise – before you commit to anything. No trip charge inside the home county. No pressure to decide on the spot.
Call (727) 291-4678 any time, day or night. Someone will pick up. That’s the one down the road – and that’s how Ed runs this company.
Pricing reflects the Little Gables market as of 2026. Winslow Windows & Doors offers free estimates – call (727) 291-4678.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Little Gables, FL since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
What Our Customers Say
"We sat out a hurricane behind the windows Ed put in. The gusts threw a neighbour's trampoline down the street and the loudest thing in our house was the kettle. I rang him after to say thank you and he answered his own phone, same as always."
- Thaddeus Okonkwo"The installation was clean and the windows are beautiful. The factory took about six weeks to deliver the units, which Ed told me upfront, but living behind plywood-framed openings in the meantime still tested my patience."
- Guadalupe Zamorano"Excellent work and a fair price for what it is, though impact glass is never cheap and one bedroom window arrived with a scratched pane. Ed flagged it before I saw it and the replacement went in without me chasing anyone."
- Bartholomew Crenshaw