Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Little Gables: What to Know First
Therma-Tru roof repair in Little Gables typically runs between $450 and $1,800 depending on whether we’re sealing a single penetration point, replacing flashing around a Therma-Tru skylight or vent boot, or rebuilding the seal system across a roof transition. Most repairs are completed in one visit, with the exception of full re-flashing jobs that may need a follow-up inspection after the next heavy rain. We’re an independent Therma-Tru service provider, which means we answer to you and to Ed Winslow, not to a manufacturer’s corporate office.
If you own a Therma-Tru product and your roof is leaking, this page will tell you exactly how we diagnose the problem, what the repair involves, and what you can expect to pay in Little Gables. Our phone is (727) 291-4678, and a live person answers it, day or night.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru is best known in Florida for its fiberglass and steel entry doors, but the brand’s roof-adjacent components, including door caps, threshold systems, and the flashing kits that tie door frames into rooflines, fail in predictable ways in a hot, wet climate. Here’s what we see on Therma-Tru roofs in Little Gables:
- Door cap flashing separation on Classic-Craft and Pulse series doors. The Therma-Tru door cap that sits above an exterior door collects water that runs down the roofline or door surround. When the cap’s sealant degrades under relentless UV exposure, water slips behind the cap and travels down the door frame into the subfloor or ceiling below. The fix is removal, cleaning, new flashing tape, and re-sealing with UV-rated elastomeric. We do not caulk over the old bead. Caulk over caulk is how you get a repeat call in six months.
- Threshold rot at Fiber-Classic door installations. Therma-Tru’s Fiber-Classic line uses a fiberglass skin over a wood core. Where the threshold meets decking on a second-story landing or roof-deck conversion, water that pools under the threshold wicks into the wood core. You’ll see soft spots at the door base long before the roof itself shows damage. We fix this by pulling the door, repairing the substrate, and reinstalling with a full sill-pan system, not just a bead of sealant.
- Improper kick-out flashing at roof-to-wall transitions near Therma-Tru sidelights. Little Gables homes built in the 1940s and 1950s have low-slope sections and tight roof-to-wall intersections. When a Therma-Tru sidelight was installed next to a sidewall, and the roofer never installed a kick-out diverter, every rainstorm funnels water directly at the sidelight frame. The symptom is water staining the interior wall below the sidelight, nowhere near the door. The cause is the missing diverter, not the Therma-Tru product. Adding a proper kick-out and re-flashing the wall penetration solves it permanently.
- Compressed door frame seals after roof repair work. We see this often: a roofer replaces shingles or re-does a roof plane near a Therma-Tru entry door and leaves the door frame seal compressed, shifted, or caulked by someone who didn’t understand how Therma-Tru corner gaskets work. The door still opens and closes, but the thermal and weather seal is broken. When we do roof work around a Therma-Tru door, we re-set the frame gaskets and test with a water wand afterward. That step takes twenty minutes. It’s the difference between a leak and no leak.
- Skylight and vent boot failures around Therma-Tru roof penetrations. While not Therma-Tru branded, the boot assemblies and flashing kits that homeowners often assume are “the Therma-Tru part” are the most common leak source we repair in Little Gables. Cracked rubber boots around vents and degraded skylight flashing are age-related failures, not installation defects. We use OEM-standard metal flashing and EPDM boots sourced from Florida suppliers who stock materials rated for our heat, not northern warehouse inventory that hardens faster.
Our Therma-Tru Roof Repair Process
- 1
Call and talk to a person. You call (727) 291-4678, explain what you’re seeing, and we schedule a visit. If you have a written estimate from another company, we’ll give you a free second opinion on it.
- 2
On-site diagnosis. We inspect the Therma-Tru door, cap, threshold, sidewalls, and the roof plane above the penetration. We do not guess from the ground. We get on the roof and trace the water path.
- 3
Parts decision. We tell you whether an OEM Therma-Tru replacement part is necessary or whether a quality aftermarket component will perform equal or better for less. You get to choose, with full pricing on both options before any work starts.
- 4
The repair. We pull the failed component, repair any hidden substrate damage, install the new flashing, seal, or replacement part, and re-test with a water wand on the entire repair area.
- 5
Verification. We review exactly what we did with you, show you photos of the before and after, and confirm the work is covered under our Done Right Promise. If it’s not done right, we come back and make it right.
What Therma-Tru Roof Repair Costs in Little Gables
| Repair Type | Typical Price Range |
|---|---|
| Door cap re-flash and seal | $450 - $750 |
| Threshold seal replacement (Fiber-Classic or Classic-Craft) | $500 - $900 |
| Kick-out flashing installation at roof-to-wall transition | $350 - $600 |
| Vent boot replacement (single) | $250 - $400 |
| Full roof penetration re-flash (multi-boot or skylight edge) | $900 - $1,800 |
What moves the price: access (two-story homes cost more to work on than single-story), hidden substrate rot found after we open the area, and whether we’re matching an existing Therma-Tru finish on a visible component. You’ll get a line-item quote before any work begins, and the price on that quote is the price you pay. Remember our standing offer: $40 off any repair over $200, and 10% off for seniors and veterans. Call (727) 291-4678 for a free estimate.
Why Little Gables Homeowners Call Winslow Windows & Doors for Therma-Tru Work
We started Winslow Windows & Doors in 2011, and Ed Winslow’s name has been on the truck since day one. He grew up in Little Gables, not far from the old Coral Gables Congregational Church, and he’s been working on South Florida homes for the better part of two decades. When you call, a live person answers. Every technician who arrives at your door is background-checked and in uniform, so you know exactly who’s coming before the truck pulls up.
We’re authorized installers for eight brands, including PGT, CGI, CWS, and ES Windows alongside Therma-Tru. If your roof repair reveals that the door itself is too far gone, we’ll tell you honestly and quote a replacement using whatever brand genuinely fits your home, not whatever we have sitting in the warehouse. And every job, repair or replacement, is covered by our Done Right Promise. We’re the one down the road, and we’ve got a published address and license number to prove it.
FAQs
Therma-Tru’s warranty covers manufacturer defects in door components, not installation workmanship or roof flashing failures. If a Therma-Tru door cap cracked due to a material defect, Therma-Tru may replace the cap. But if the roof leak is from failed flashing, improper kick-out installation, or age-weathered sealant, that’s on the installer’s workmanship or normal wear, and the manufacturer won’t pay for the repair. We handle both scenarios and can tell you which one you’re dealing with. Call (727) 291-4678 and we’ll assess it.
Yes. We source OEM Therma-Tru replacement components through Florida distributors who stock parts rated for our climate. However, we’ll be straight with you: for some roof-adjacent parts, like flashing kits and sealant systems, a quality aftermarket product performs as well or better than the OEM version and costs less. We quote both options and let you decide. The decision is yours, with full pricing shared before any work begins.
Most single-component repairs, like a door cap re-flash or vent boot replacement, are completed in one visit of two to four hours. Larger jobs involving multiple penetrations or hidden substrate repair may take a full day. You’ll have the timeline before we start, and it won’t change unless we find something unexpected, in which case we’ll show you photos and get your approval before proceeding.
If the door has structural wood-core rot in the Fiber-Classic line or significant frame compression, replacement is usually the better long-term investment. But many leaks that look catastrophic from the inside are actually flashing failures on the outside, and a $500 re-flash fixes the problem for years. We’ll always tell you the truth about which one you need, because if we sold you a replacement you didn’t need, you’d see the rain streak through your new door and know we didn’t do our job. Call (727) 291-4678 for a free assessment.
Most flashing and seal repairs do not require a permit under local building codes. If the repair expands into structural work or door replacement, we pull the permit, schedule the inspection, and you’ll see the passed inspection document before we consider the job complete. We handle the paperwork. You handle deciding whether the work looks right.
If you’re dealing with a Therma-Tru roof leak in Little Gables, don’t wait for the next storm to tell you how bad it is. Call (727) 291-4678 and we’ll schedule a free estimate, send a background-checked tech in uniform, and give you a line-item quote you can count on. Ed Winslow’s name is on the truck, and the work has to be right, every time.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Little Gables and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.